Release (1 Gallon)
Silicone Lubricating Agent
Overview
RELEASE is a silicone-based lubricant solution designed for silicone rubber molding applications, offering rapid cure, excellent slip, and maximum multiple releases. It enhances productivity, extends tool/mold life, improves part quality, and reduces defects. This versatile product facilitates smooth sliding without leaving a greasy mess, suitable for power tools. It serves as a silicone mold release agent for automotive components, offering heat resistance and chemical inertness. RELEASE prevents sticking, improves productivity, and addresses machinery issues, offering comprehensive benefits for industrial use.
Directions For Use
Clean mold surface thoroughly. Mechanical cleaning followed by chemical cleaning provides the best surface. Removal of all previous mold release agents is critical. Spray a light mist 12 - 15 inches away onto the mold surface or wipe on a continuous light film with a brush or clean, lint-free cloth. A wet coat should be applied, but RELEASE should not run, puddle or drip. Over spray build-up and excess release can be wiped away, and reapplied to other areas of the mold. If product does not dry free of diluent within minutes, rub out the excess material. Heating the mold for 5–10 minutes at 200–400°F (93–204°C) will speed the drying process, improving release and durability of the parting film. When release becomes less effective, reapply a single light coat as needed. Clean molds prior to subsequent coating or bonding applications. For best results use at 70-80°F (21-28°C). Cold product will cause poor atomization. Do not expose container to temperatures over 120°F (49°C).