Crete Delete (5 Gallon)

CRETE DELETE concentration is a 100% active, non-corrosive concrete remover suitable for trucks, mixers, tools, and equipment. Its proprietary formula ensures no damage to metal surfaces and promotes easier future cleanups through its residual action. The product is water-activated and allows for extended application, including overnight use without surface damage. It may require multiple treatments for older or cured concrete buildups.

Apply to a dry surface.

1. Dilute 1 part CRETE DELETE concentrate with up to 3 parts water.
2. Spray product onto concrete buildup at the end of day.
3. Allow CRETE DELETE to soak into surface as needed. The product effectiveness increases the longer it is allowed to work on the surface. Reapply as needed. CRETE DELETE can be left on the surface overnight.
4. Using a strong stream of water, rinse away the dissolved concrete.
5. On neglected concrete trucks or equipment with build-up older than six months, repeat the application as needed.
6. After build-up has been removed, maintain the appearance of your equipment by regular use of CRETE DELETE.

DISPOSAL/SPILL INFORMATION

As with all cleaning and maintenance procedures, run-off from the cleaning or maintenance process should be diverted to a collection vessel, or where permitted, to a sanitary sewer (consult local and state regulations), and not allowed to soak into the ground or to enter a storm sewer. If this product is spilled or contaminated and cannot be used, creating the need for disposal, absorb product with an inert absorbent material and deposit in a clean sealable D.O.T. specified container for disposal as a hazardous waste. Rinse area well with water.