Stick'em (5 Gallon)

STICK’EM belt dressing eliminates belt slippage, increasing power, performance and efficiency of equipment. STICK’EM lengthens the life of all belts. This superior belt dressing will not gum up or attract dust or dirt. It increases grip power to all types of belts including canvas, leather, fabric and rubber. Designed to reduce slippage of all types of power belts whether round, flat or V. STICK’EM saves times and money by extending belt and pulley bearing life. It cleans away dust, dirt and other elements that gum up machinery.

• Installed Belts: Apply STICK’EM lightly with a trigger sprayer to the belt’s inner surface, focusing on the area near the smallest or uppermost pulley while the engine is running. Allow the belt to operate for several minutes to enable conditioning and curing of the dressing, with a recommended cure time of approximately 15 minutes. Reapply as needed, ensuring not to spray on pulleys to avoid slippage.
• Uninstalled Belts: Spray STICK’EM on both sides of the belt to moisturize and soften it. Allow the dressing to soak in, reapplying for extremely dry belts. Reinstall the belt following the manufacturer’s instructions. Note that initial squeaking may occur but will lessen with use.

Note: Avoid spraying dressing on pulleys. The dressing helps stop belt squeak by softening and moisturizing the rubber. Allow for a cure time of about 15 minutes for optimal results.